|
|||||||||||||||||
|
Measure from the center of the top hole to end of down tube distance. It *should* be 20 or 30 mm. There doesn't seem to be any rhyme or reason as to which gliders have which configuration. If we come up with one, we'll post it. We manufacture and stock both configurations.
Always a good idea to confirm the length of the down tube. |
||||||||||||||||
| I'm a little concerned about the possibility of the flap rope(s) rubbing against the sides of the milled slot in the Attack Tube, where the pulley is positioned.
Until I can find a more elegant solution, please install the original pulley(s) from the Exxtacy/GB DT in the manner shown below. I've purposely left the mylar long so that the Pilot in Command can trim to their satisfaction. I welcome feedback at 888/530-9940 or aoa@pacbell.net |
|||||||||||||||||
 |
|||||||||||||||||
